Engraved Valentine Spinning Statement / Affirmation Tags & Magnets - 2 sizes with multiple options

Description:
This purchase includes a file for making these 3 layered Spinning Valentine´s Tags / Ornaments / Magnets with 2 engraved front designs, engraved or scored affirmation wheel and a heart or cupid on the lever to make it slide.

You can personalize the front as you wish and mix and match them with the other Valentine's Spinners.

The file is made for engraving and/or scoring and the pictured pieces is cut from 4mm (1/8”) plywood and are set to measure approximately 10cm/4” on the big tag/magnet and the mini version measure around 6cm/2.4", which makes it perfect for scrap usage. You can ude any thickness of material, but I recommend thinner material.

Assembling couldn't be easier and doesn't require any hardware. The files are included with a PDF document, that links to a YouTube tutorial on assembling. You can also find all my tutorials in my helping group, by following the link below.

Make sure to sand the slider part on both sides, so you remove a little material and make it nice and smooth, which will make the sliding go easier. Optional you can add a piece of paper/cardboard on the center round, to make it a tiny bit wider.
Apply glue to the middle center piece of the slider and glue it to the back and front of the ornament.
Optionally (and recommended) use a staple gun and staple it to the back, this will help lifting the front a bit.
Glue the front in place and optional add the layered hearts.
You can use whatever thickness of material as well as resize it as long as you resize everything.

For more questions or info on my files and products, feel free to join my helping group Laser up with MiMo Design on Facebook.
https://www.facebook.com/groups/3009939039221973/
Or our All Stars Community Group:
https://www.facebook.com/groups/284423150964862/?ref=share_group_link