MiMoDesignLaserFiles
Cutting Board Shaped Easter Bunny Treat Trays - Scored & Engraved version, left/right handed, layered eggs + carrots
Regular price
$7.50 USD
Regular price
Sale price
$7.50 USD
Unit price
per
Tax included.
Couldn't load pickup availability
Description:
This purchase includes files for making these Cutting Boards shaped Treat Trays.
The files includes a all scored version, a all engraved and a scored design with engraved handle part.
All 3 designs with a left- or right sided handle as well as optional Easter Eggs and Carrots for layering.
The boards measure 15x7.5" / 38x19cm but can be resized however you like.
The boards can be made from any type and thickness of material.
I recommend to cut these from minimum 1/4" (6mm) material.
If you can´t cut thick material, I also included a blank backer, so you can layer it and make it thicker.
Mine is made from 10mm poplar plywood and since I have a 80W Co2 and 60x40cm sheets, I can fit 3 of these on a single sheet, which makes them super profitable.
With my settings, the scored version only take 5:53 to make, where the engraved version takes 31:15 minutes, which is why I prefer to score as much as possible.
If you don't know how to do it, you should know that all lasers can and here's a little blog post I wrote on the subject:
https://allstarsdesign.com/blogs/tutorials/scoring-vs-engraving
Assembling:
These are litterally finished in 10 minutes. I made a YouTube video on I made my pictured boards, that can be found in my helping group and here: https://youtu.be/CuyCzlszBDQ
If you want to know more about making plywood foodsafe, here's another blog post on that subject:
https://allstarsdesign.com/blogs/tutorials/how-to-make-your-plywood-safe-for-food
For more questions or info on my files and products, feel free to join my helping group Laser up with MiMo Design on Facebook.
https://www.facebook.com/groups/3009939039221973/
This purchase includes files for making these Cutting Boards shaped Treat Trays.
The files includes a all scored version, a all engraved and a scored design with engraved handle part.
All 3 designs with a left- or right sided handle as well as optional Easter Eggs and Carrots for layering.
The boards measure 15x7.5" / 38x19cm but can be resized however you like.
The boards can be made from any type and thickness of material.
I recommend to cut these from minimum 1/4" (6mm) material.
If you can´t cut thick material, I also included a blank backer, so you can layer it and make it thicker.
Mine is made from 10mm poplar plywood and since I have a 80W Co2 and 60x40cm sheets, I can fit 3 of these on a single sheet, which makes them super profitable.
With my settings, the scored version only take 5:53 to make, where the engraved version takes 31:15 minutes, which is why I prefer to score as much as possible.
If you don't know how to do it, you should know that all lasers can and here's a little blog post I wrote on the subject:
https://allstarsdesign.com/blogs/tutorials/scoring-vs-engraving
Assembling:
These are litterally finished in 10 minutes. I made a YouTube video on I made my pictured boards, that can be found in my helping group and here: https://youtu.be/CuyCzlszBDQ
If you want to know more about making plywood foodsafe, here's another blog post on that subject:
https://allstarsdesign.com/blogs/tutorials/how-to-make-your-plywood-safe-for-food
For more questions or info on my files and products, feel free to join my helping group Laser up with MiMo Design on Facebook.
https://www.facebook.com/groups/3009939039221973/
