3D Birthday Ballons 30 days Countdown Tag or Magnet with B-Day Cake lever on the spinner

This purchase includes a file for making a 30 days Birthday Countdown tag or magnet with a layered ballons on the front design and a layered cake on the lever that makes it spin.
The Countdown is counting down from 30 to 1 days.

No hardware is needed to make these and assembling take less than 10 minutes.
This file was completed by a tester, but assembling is easy and you can a bunch of tutorials on similiar Countdowns and Spinners on my YouTube Channel MiMoDesignLaserfiles and in my Facebook helping group, by following the link below.

You can personalize the front as you wish and mix and match the included elements.

The file is made for engraving and scoring and the pictured pieces is cut from 1/8” plywood.
The finished countdown set to measure approximately 4” / 10cm.
You can use any thickness of material, but I recommend thinner material.

Make sure to sand the slider part on both sides, so you remove a little material and make it nice and smooth, which will make the sliding go easier. Optional you can add a piece of paper/cardboard on the center round, to make it a tiny bit thicker or use a stapler like me.
Apply glue to the middle center piece of the slider and glue it to the back and front of the ornament.
Optionally (and recommended) use a stapler and staple it to the back, this will help lifting the front a bit.
Glue the front in place and add the layered bunny.
You can use whatever thickness of material as well as resize it as long as you resize everything.

For more questions or info on my files and products, feel free to join my helping group Laser up with MiMo Design on Facebook.
https://www.facebook.com/groups/3009939039221973/
Or our All Stars Community Group:
https://www.facebook.com/groups/284423150964862/?ref=share_group_link