3D Penguin Xmas Layered Fairy Light Bauble Ornament with battery door to change batteries for LED Lights

Description:

This purchase includes the files for making this cut ornament, that lit up with led fairy lights (10 bulbs) from Amazon.

Here´s the type that I have: https://a.co/d/6jCctou - It´s not the exact, but the important thing to look for is the battery and that it's 10 bulbs LED lights.

The files includes:

- 1 Front with a layered Penguin

- A Middle Divider, that should be cut from the same thickness as the battery holder - approx. 1/4" (6mm). You can layer two pieces of 1/8" if you don´t have a thickness matching.

- Backers with doors for changing batteries: 1 regular and 2 with taps for small screws.

- Additional a cap for the hanger.

The file is made easy for scoring and cutting and can be made with all lasers.

The ornaments measure approximately 12cm/4.7” when assembled.

The thickness will depend on the material you use, but I recommend thin material (1/8"/3mm) for the sides and thicker material (1/4"/6mm) for the divider.

Assembling is super easy on these, because of a renewed system.

They lights, that are the most time consuming part, took me 10 minutes to add with a hot glue gun.

The tutorial link on assembling, is included with the files in a PDF document.

I also made a tutorial on my painting techniques for the similar painted polar bear, which can be found here:

https://youtu.be/9a14AuPoC4I?si=ErvDwaguT7VeYa0p

For more questions or info on my files and products, feel free to join my helping group Laser up with MiMo Design on Facebook.

https://www.facebook.com/groups/3009939039221973/

Or our All Stars Community Group:

https://www.facebook.com/groups/284423150964862/?ref=share_group_link